USB Input 13-14, 1-2 instead

Forums › Forums › CQ Forums › CQ feature suggestions › USB Input 13-14, 1-2 instead

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2023/09/21 at 10:24 am #115035
    Profile photo of WutschgoWutschgo
    Participant

    Hello, I have an suggestion.
    I am using the the CQ12T via Core Audio on a Mac.
    If I want to playback a Signal (Music, Teams, …) the Mac sends it on channel 1-2, that means I have to use
    the first two channels for the USB stream and am not able to use them for microphones.

    Is it possible to route the USB from 1-2 to the USB channel 13-14? Or will it be possible in future?

    greetings Wutschgo

    2023/09/21 at 12:39 pm #115036
    Profile photo of TimoTimo
    Participant

    Hi,
    you can configure the CQ-12T as a multistream device. You can do this in the config-tab inside the CQ MixPad. With this, there is a dedicated USB-channel for audio coming from the pc or mac. So you don’t loose any inputs. I have the CQ-20B under Windows 11, but it should be the same with the CQ-12T and a mac. Try this.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.