USB destorsion

Forums › Forums › Qu Forums › Qu troubleshooting › USB destorsion

This topic contains 4 replies, has 3 voices, and was last updated by Profile photo of ambulance23 ambulance23 9 years, 1 month ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • 2015/01/25 at 8:45 pm #44764
    Profile photo of ambulance23
    ambulance23
    Participant

    When I use the asio driver(w8.1 64x) for streaming audio in my QU16 mixer, the first 30 seconds works it, but than a noise/destorsion come over the signal. Does anbody recognise this? OR can anyboy tell me how i can solve this problem?

    2015/02/22 at 1:02 am #45509
    Profile photo of Mikey B
    Mikey B
    Participant

    Similar problem here (same OS)…. Sometimes it just freaks out during playback all screechy.. Can usually be stopped by stopping audio and then restarting… But it’s annoying..

    2015/02/22 at 1:09 am #45511
    Profile photo of Mikey B
    Mikey B
    Participant

    See if my thread sounds similar…

    Qu32 screeching during playback

    2015/02/23 at 5:56 am #45519
    Profile photo of eotsskleet
    eotsskleet
    Participant

    Could it be a too
    Small Buffer size? I had this problems with another setup a few years ago! I had to set a higher latency from the audio driver! Can’t tell you if this is possible with the asio driver!

    2015/02/28 at 5:32 pm #45629
    Profile photo of ambulance23
    ambulance23
    Participant

    I don’t know the real problem. A hard reset solved the problem. A lower buffersize has the same effects.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.