USB cable stream

Forums › Forums › SQ Forums › SQ general discussions › USB cable stream

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2022/07/11 at 6:18 pm #107948
    Profile photo of raycarroll03raycarroll03
    Participant

    At my church when streaming our service we have in the past sent audio to a presonus then from that usb cable to the computer. Over the last few weeks we are not using the presonus and have used usb straight from the sq6 to the computer and we have been getting a popping noise on the live steam. Also when play videos from propresenter or play music and it is sent via usb and we still get a popping noise. Any advice would be greatly appreciated. Thanks

    Ray

    2022/08/17 at 2:25 pm #108563
    Profile photo of nottooloudnottooloud
    Participant

    Sounds like clock speed mismatch. Make sure the computer is set to the same clock speed as the desk, either 48k or 96k, and that the desk is the clock source.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.