unpairing the stereo mix outputs on Qu24

Forums Forums Qu Forums Qu general discussions unpairing the stereo mix outputs on Qu24

This topic contains 3 replies, has 2 voices, and was last updated by Profile photo of [XAP]Bob [XAP]Bob 5 years, 6 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #56089
    Profile photo of Gateway_Neil
    Gateway_Neil
    Participant

    Hi

    Am new to the forum but am close to purchasing the QU24 for our house of worship.
    I am looking for at least 8 mono mix outputs for using IEM, so my question is:-

    Can you un-pair the 3 stereo outputs 5/6,7/8,9,10 to give you an extra 6 mono outputs?

    I understand that I can use the stereo outputs as mono by panning fully one way, but that only gives me 7 mixes..

    Am hoping this is something that can be done with the latest firmware upgrades?

    Thanks 🙂

    #56094
    Profile photo of [XAP]Bob
    [XAP]Bob
    Participant

    Nope, but you can sacrifice a group as an extra mix (or route the FX mixes to AltOut and use those)

    This is a commonly requested feature though…

    #56099
    Profile photo of Gateway_Neil
    Gateway_Neil
    Participant

    Thanks Bob

    Has A&H ever hinted or confirmed if they will add this feature in a future update? Or does it look like we will be stuck with it?

    #56102
    Profile photo of [XAP]Bob
    [XAP]Bob
    Participant

    It’s unlikely tbh.
    The issue will be DSP and UI, it’s one of the few things that has a physical UI.

    I’d love to be proved wrong… Fortunately it doesn’t affect me much…

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.