Ugh newbie help please

Forums Forums CQ Forums CQ troubleshooting Ugh newbie help please

This topic contains 3 replies, has 3 voices, and was last updated by Profile photo of Gaz Gaz 4 weeks ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #120525
    Profile photo of Eliascalles
    Eliascalles
    Participant

    Hi all. Well I’m off to an embarrassing start. Brand new cq20b. Brand new 9th gen iPad. Plugged in MIXER. flashing blue light. Launched CQ app v1.1.3 Don’t see mixer? Reset mixer per manual. Reinstalled app. Still only shows demo mode. I’m maybe 3 out of 10 when it comes to this stuff (but been mixing FOH for 40 years) so any help getting setup would be so appreciated. Thank you!

    #120526
    Profile photo of Eliascalles
    Eliascalles
    Participant

    Tried connecting to “other” using 192.168.2.1but said could not connect

    #120527
    Profile photo of mfusa
    mfusa
    Participant

    Did you connect the iPad to the wifi network of the CQ or did you cable the network port of the CQ into your existing network (assuringly the same network as the iPad is sitting on wirelessly).

    If you are trying to connect wirelessly between the iPad and the Mixer then using the mixer in wifi access point mode will be the simplest method. These steps are explained on pages 16-18 of the CQ user manual. Once the iPad and CQ are on the same network the mixer should show up in the list of available systems to connect to.

    #120544
    Profile photo of Gaz
    Gaz
    Participant

    Go to iPad settings first and then Wifi menu. Find the mixer in the list of networks. The mixer behaves like a WiFi router, that’s how you connect to it and how the iPad communicates with it.
    When the iPad is connected, go back to the CQ app and now you should be able to select your mixer from the list.

    Good luck!

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.