UFx Spaces parameters

Forums › Forums › dLive Forums › dLive General Discussions › UFx Spaces parameters

  • This topic has 2 replies, 2 voices, and was last updated 4 months ago by Profile photo of RSRS.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2024/08/08 at 1:35 pm #124531
    Profile photo of RSRS
    Participant

    Will there be a in-depth manual what the Spaces module parameters actually do?
    I find it way easier to get the sounds I am looking for, if I understand what parameters are for. It seems even more difficult by just fiddling around, as I have the feeling that some parameters have cross influence to other sections of the module. So on top a signal flow chart would be very helpful to me.

    2024/08/08 at 1:59 pm #124535
    Profile photo of KeithJ A&HKeithJ A&H
    Moderator

    Hey @RS

    You’ve probably already seen this, but just in case – there is an appendix with info on Spaces and other UltraFX processing here – https://www.allen-heath.com/content/uploads/2023/05/dLive-Firmware-Reference-Guide-V2.0-ISS-2.pdf#page=130&zoom=auto,-218,781

    Thanks,
    Keith.

    2024/08/08 at 9:26 pm #124553
    Profile photo of RSRS
    Participant

    Thanks @KeithJ for pointing that out. That must be new to ISS2 of the reference guide? At least I can not remember it being there in the first place… 🤔

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.