Trouble Connecting SQ7 FOH to SQ6 broadcast

Forums Forums SQ Forums SQ general discussions Trouble Connecting SQ7 FOH to SQ6 broadcast

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #124548
    Profile photo of Jpcurrie01Jpcurrie01
    Participant

    We have an SQ7 installed for FOH. Some inputs are local into the board and some are cconnected to an AB168. Then we installed an SQ6 for broadcast. We want the 2 boards to see all the inputs going to the sq7. The problem that the sq6 see all the sq7 inputs except for the inputs coming from the ab168. Is he trying to do everything with one slink?? What do we need to add or do to get this working?
    Thanks

    #124554
    Profile photo of TIMOTTIMOT
    Participant

    I think you will need to purchase an S-Link card for one of the consoles. The SQ-6 and SQ-7 will be link together with a dedicated network cable (minimum STP CAT-5E) on the GX protocol and the open S-Link port will be a dedicated network cable (minimum STP CAT-5E) to connect to the AB168 on the D-Snake protocol.
    This way the consoles will see each other and the stage box and will be running different protocols on each dedicated line.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.