Toggle filters in PEQ view

Forums › Forums › Avantis Forums › Avantis feature suggestions › Toggle filters in PEQ view

This topic contains 3 replies, has 4 voices, and was last updated by Profile photo of Duesenbert Duesenbert 1 year, 11 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 2022/04/10 at 10:26 am #106777
    Profile photo of davidgiga1993
    davidgiga1993
    Participant

    It should be possible to enable/disable the HPF/LPF filters in the PEQ view.
    This saves switching to the filter view during soundcheck and improves the workflow since there are less context switches.

    This change would be nice for all A&H mixers btw 😉

    2022/04/10 at 7:52 pm #106780
    Profile photo of Yvo
    Yvo
    Participant

    +1 and it would also be nice to be able to reset individual bands.
    I’m missing a slope control on the shelves too.

    The EQs sound good though 😉

    2022/05/01 at 4:45 pm #106991
    Profile photo of Chris Irwin
    Chris Irwin
    Participant

    +1 I would love to be able to control the HPF/LPF from the EQ screen. Yes, I understand they are at a different place in the signal path, but it certainly slows things down having to switch back and forth.

    2022/05/03 at 5:55 pm #107033
    Profile photo of Duesenbert
    Duesenbert
    Participant

    You can configure the encoders to the right of each screen to control the HPF and LPF. That allows you to open the PEQ tab and have all controls on one screen. Unless you need those encoders for something else, which is totally understandable.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.