The faders doesn't work

Forums › Forums › Qu Forums › Qu troubleshooting › The faders doesn't work

Tagged: ,

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2022/09/19 at 1:06 am #109102
    Profile photo of EmilianoismailEmilianoismail
    Participant

    i have a lot of problems with my QU-32. first at all, as you can see the fader firmware don’t appear and the faders doesn’t work. also only have signal in pafl and not in the main output (L/R). i tryed with hard reset, changed the firmware and recalibrate the faders. nothing of this was the solution. please help me with this. I don’t know what else to do.

    Attachments:
    You must be logged in to view attached files.
    2022/09/19 at 9:05 pm #109116
    Profile photo of GigaGiga
    Participant

    Is it still under warranty ? If so, drop it off at the store. If not, I think I would open it up and check all connectors and/or reseat/ clean them.

    Good luck !

    Giga

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.