Tap Delay Average

[CoronosParticipant]

The tap delay is an almost indispensable feature to have–when it works properly.

I have a hard time getting an accurate tempo on my SQ-6. I don’t know if it’s a software or hardware problem, but the tempo is often set significantly slower than what I was tapping. While I can quickly get close to the desired tempo, it almost always requires further attempts, or manual adjustment with the rotary control.

A helpful change would be for the board to take the average of the last 4 taps for a new setting. (Obviously if the user tapped fewer than 4 times, the average of all the taps would be used.)

[SteffenRParticipant]

it works as expected on my site

[New2SQParticipant]

+1 – should be average option.

[Author]

Posts