Switching inputs on multi-track playback

Forums Forums Qu Forums Qu feature suggestions Switching inputs on multi-track playback

This topic contains 4 replies, has 4 voices, and was last updated by Profile photo of Simmo Simmo 7 years, 4 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #35733
    Profile photo of derekjsmith
    derekjsmith
    Participant

    When playing back multi track it would be nice to have a option on the Qu-Drive screen to switch inputs to Qu-Drive as a enable/disable toggle. Or have an option to auto switch on playback.

    #35756
    Profile photo of derekjsmith
    derekjsmith
    Participant

    Before firmware update this was done in the USB Audio page but that page has been moved/removed with the 1.1 update. Now you have to select a channel, select processing, select preamp, press the Fn button for source select. Now you get the Source Select page.

    There must be a better way to easily select Qu-Drive USB from the Qu-Drive pages.

    #36130
    Profile photo of
    Anonymous

    yes, please. It’s too inconvenient to have to switch all channels by hand to hear the record, then switch all them back to record again…

    #36211
    Profile photo of eurobuie
    eurobuie
    Participant

    yes please

    #36439
    Profile photo of Simmo
    Simmo
    Participant

    Yes please if the source select page that was taken off the Qu Drive menu options in update 1.1 could be reintroduced it would save having to go through each channel 1 at a time to set input source

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.