Surrender channels for busses

Forums Forums Avantis Forums Avantis feature suggestions Surrender channels for busses

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #104783
    Profile photo of YvoYvo
    Participant

    I find myself in a situation where I’d almost never run out of channels but I’m often a bit limited by the 42 busses.

    It would be cool it we could surrender groups of channels in order to gain busses.

    2:1 ratio would even be fine.
    Surrender 4 channels and gain two mono busses or a stereo bus.

    It could really come in handy.

    #105766
    Profile photo of DuesenbertDuesenbert
    Participant

    Would love this! I got used to DiGiCo, where all that matters in input/buss/matrix configuration is the bottom line. As long as you’re under budget overall, then you’re golden.

    #105771
    Profile photo of BrianBrian
    Participant

    It would be great if there was an option like this! 42 busses sounds like a lot, but it goes quickly – especially if you are using stereo groups, sends and FX.

    #106993
    Profile photo of Chris IrwinChris Irwin
    Participant

    +1 The 42 busses do run out very quickly.

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.