Surface Error

Forums Forums dLive Forums dLive troubleshooting Surface Error

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of Nicola A&H Nicola A&H 5 years, 8 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #53630
    Profile photo of Yacob
    Yacob
    Participant

    Hello all,

    I have been having some issues with having some error codes popping up. I’m not sure that they are causing any issues as far as the console running but I figured I would ask and see if anyone has any suggestions.

    Thu Dec 3 2015 03:55:56.629 :: ERROR: SwitchValue out of range (200), mNumberOfStates: 2, mCurrentState: 0 (../../QtGUIComponents/Widgets/SwitchWidget.cpp:342) :: 2 :: -1
    Thu Dec 3 2015 03:55:56.630 :: ERROR: For: Channel PEQ HF Band Bypass Switch (../../QtGUIComponents/Widgets/SwitchWidget.cpp:343) :: 2 :: -1
    Thu Dec 3 2015 03:55:56.630 :: ERROR: Bad conversion to boolean for UBYTE with value 0xc8 (../../AES-Standards/Convert.cpp:26) :: 2 :: -1
    Thu Dec 3 2015 09:34:01.694 :: 127.0.0.1 Disconnected (AHNet) :: 0 :: -1
    Thu Dec 3 2015 09:34:02.610 :: (P) Touchsreen Halting :: 0 :: -1
    Thu Dec 3 2015 09:34:02.611 :: dLive Mix Rack Disconnected (AHNet) :: 0 :: -1

    This is what ive been able to find as far as logs with errors in it. If anyone needs more info or anything like that please let me know!

    Thanks in advance!

    Jacob Everett

    #53631
    Profile photo of Yacob
    Yacob
    Participant

    So sorry everyone! I just realized i uploaded the wrong error. Oops!

    Anyways, here is the one in question:

    Thu Jan 28 2016 17:19:50.234 :: ERROR: No visible tabs to show! (../../TLD/TLDQtGUIComponents/TabBar.cpp:435) :: 2 :: -1
    Thu Jan 28 2016 17:19:50.234 :: ERROR: No replacement tabs to show within active group! Handle this with an explicit ShowTabGroup. (../../TLD/TLDQtGUIComponents/TabController.cpp:162) :: 2 :: -1

    Thanks again!

    #53655
    Profile photo of Nicola A&H
    Nicola A&H
    Keymaster

    Hi Yacob, can you confirm you are running latest firmware V1.10?
    If so could you submit a ticket to our Support team or send an email to support@allen-heath.com with your logs and show file, and we’ll look into this for you.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.