Topic: Surface Dimensions | Allen & Heath Digital Community

Surface Dimensions

This topic contains 3 replies, has 2 voices, and was last updated by SteffenR 5 years, 1 month ago.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
2019/03/20 at 7:56 pm #82846

Jay
Participant

Keith or Nicola,

Do you have surface datasheets that have complete dimensions for the purpose of having custom covers made?

Cloud 9 Covers is putting the templates together for me for C1500, C3500, S5000 (and SQ6) but the published datasheets are incomplete from the side view and making it difficult. Maximum height and width doesn’t really provide the necessary information for surface slope and where the offsets occur.

– some have angles, no vertical or horizontal measurements.
– some vertical measurements, no horizontal.

Here are the links I have (disabled for this posting):
http://www.allen-heath.com/media/SQ-6-Technical-Datasheet_D.pdf
http://www.allen-heath.com/media/C1500-Datasheet.pdf
http://www.allen-heath.com/media/C3500-Datasheet.pdf
http://www.allen-heath.com/media/S5000-Datasheet-2.pdf

Thanks,

Jay

2019/03/21 at 8:51 am #82852

SteffenR
Participant

the other dokument

https://www.allen-heath.com/media/C2500-WEIGHTS-AND-DIMS.pdf

2019/03/21 at 1:20 pm #82857

Jay
Participant

Steffen,

Thanks, but the W&D drawings have the same issues. For that one, it has total width & height, height of surface and angles of incline on the display. The side view doesn’t specify the measurements from the front/rear for the center of the angles or the height at different points.

Hoping to find out today from Cloud 9 what they still need.

Jay

2019/03/22 at 11:26 am #82879

SteffenR
Participant

https://www.allen-heath.com/media/dLive-C-Class-Weights-Dimensions.zip

these are CAD files
Author

Posts