Stereo Group PAN???

Forums Forums dLive Forums dLive troubleshooting Stereo Group PAN???

This topic contains 5 replies, has 5 voices, and was last updated by Profile photo of Dave Dave 10 months, 2 weeks ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #111370
    Profile photo of The old dude
    The old dude
    Participant

    It’s probably very stupid but how can I pan a stereo group at like 9-3 or 10-2??? I’m not on a physical surface, only on a d wing/computer so only a trackpad… 🤔🤓

    #111377
    Profile photo of andiabwaerts
    andiabwaerts
    Participant

    seems like stereo groups are true stereo busses with one channel going to L and the other channel going to R, no panning. you can always pan the groupmembers accordingly.

    #111378
    Profile photo of The old dude
    The old dude
    Participant

    But only on side then, I really don’t get why we can’t pan as we want 🙃
    I mix a lot with groups and it looks like a very arbitrary thing to do

    #111381
    Profile photo of RuneS
    RuneS
    Participant

    Just select your StMain (or matrix if you are sending busses directly to a matrix) and hit the ‘Routing’ button. You can pan your busses there.

    #112699

    In Dlive Director you right click the rotary knobs above the fader to change their function to pan instead of gain/trim.

    #112922
    Profile photo of Dave
    Dave
    Participant

    The ”Pan” knob switches to “Balance” on stereo channels.

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.