Stereo Compressors

Forums Forums dLive Forums dLive troubleshooting Stereo Compressors

This topic contains 3 replies, has 3 voices, and was last updated by Profile photo of SteffenR SteffenR 4 years, 1 month ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #61238
    Profile photo of Luke
    Luke
    Participant

    Hello,

    I currently have a stereo group that I route all my drums too. The reason for this because I like to add a bit of “glue” to them with compression. However, I have noticed that once I activate the compressor, the left side gets incredible weaker than the right. The kick and snare are centered, toms, overheads, and hat are panned left and right. I know that there can be issues on a compressing stereo group if the compressor is linked to both sides. Is that what the A&H compressors do on this board? Currently, I can’t compress a stereo group where things are panned and have each side come out nice. Any thoughts on what I’m doing wrong? Or do stereo compressors need to be added in future updates?

    #61615
    Profile photo of SteffenR
    SteffenR
    Participant

    Wich compressor u are using?
    FX Rack, Strip, Dyn8 or hardware?

    gesendet mit Tapatalk

    #61617
    Profile photo of Hög Light & Sound
    Hög Light & Sound
    Participant

    I had the same issue with the 1.40 firmware with the 160VU in drum group. I got it working by changing the compressor type to 76 and back.

    #61971
    Profile photo of SteffenR
    SteffenR
    Participant

    I will try it later…

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.