SQ6 stereo record not LR

Forums › Forums › SQ Forums › SQ general discussions › SQ6 stereo record not LR

This topic contains 3 replies, has 2 voices, and was last updated by Profile photo of SteffenR SteffenR 3 years, 7 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 2020/09/13 at 8:02 am #94846
    Profile photo of churchy
    churchy
    Participant

    Is it possible to stereo record to SQ drive not the main LR mix but another? I want to record a stereo matrix output instead as it has compression on it. I realise I could do multi track record but don’t want to waste the other 30 channels!
    If it’s not, could this be a feature request please?…

    2020/09/13 at 9:39 am #94850
    Profile photo of SteffenR
    SteffenR
    Participant

    patch it from the matrix outs and thats it

    but it was hard to find how you achiev this with no mixer at hand…
    but simply the USB output channels 1 and 2 are used for stereo recording

    the main could have compression as well
    but to use a matrix is a good idea

    2020/09/13 at 9:47 am #94851
    Profile photo of churchy
    churchy
    Participant

    Bingo, I knew it must be possible; obvious really! Many thanks.
    Strangely, the label for the right hand channel on the stereo SQ drive utility screen does not show the correct label, but seems to be working, perhaps a firmware issue? I’m on 1.5.0.

    2020/09/13 at 11:02 am #94853
    Profile photo of SteffenR
    SteffenR
    Participant

    it’s fixed in 1.5.1

    https://www.allen-heath.com/media/Release-Notes-SQ-V1.5.1.pdf

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.