SQ6 FOH controls SQ5 on stage

Forums Forums SQ Forums SQ general discussions SQ6 FOH controls SQ5 on stage

This topic contains 3 replies, has 2 voices, and was last updated by Profile photo of lightingman117 lightingman117 1 year, 1 month ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #79349
    Profile photo of TrangHo
    TrangHo
    Participant

    Hi,
    would anyone shows me the best way to set it up? I am an amature user

    #79352
    Profile photo of lightingman117
    lightingman117
    Participant

    @TrangHo

    Is there anyone who can help you do this who can teach you?

    It’s not that you can’t learn it all yourself, but to do a FOH/MON split (if that is what you are describing) I would expect substantial prior experience and help with a specific problem.

    If not, can you describe IN DETAIL what you wish to do and what you lack.

    Don’t take this the wrong way, but to gauge how to answer you we need to know what your experience level is. Have you read the manual, have you watched the youtube videos, do you have prior mixing experience, etc.?

    #79353
    Profile photo of TrangHo
    TrangHo
    Participant

    set up: all inputs and output to main and monitors to SQ5, SQ5 cat5 cable to SQ6.

    Option 1. SQ5 on stage just like DX box, all main mix and monitor mix Control by SQ6
    Option 2. SQ5 control the monitor mix on stage, and SQ6 for the FOH mix.

    I am the beginner but can learn.

    Thanks,

    #79487
    Profile photo of lightingman117
    lightingman117
    Participant

    You can’t direct control a SQ from another SQ.

    You can route audio between them.

    You can pseudo-control the SQ5’s mixes by sending the SQ6 mixes to the SQ5 inputs via sLink and then route those inputs directly to mixes.
    You might also be able to directly send audio to socket outputs on the SQ5 with the tie lines or routing, but I haven’t looked into this.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.