SQ5 Turns Stereo inputs into monos

Forums Forums SQ Forums SQ general discussions SQ5 Turns Stereo inputs into monos

This topic contains 5 replies, has 4 voices, and was last updated by Profile photo of DavidCo DavidCo 5 years, 10 months ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #70813
    Profile photo of zac
    zac
    Participant

    Hi,

    i m wondering if it s possible to use the 1/4 stereo inputs as 2 separates monos inputs?

    #70822
    Profile photo of jakethepeg
    jakethepeg
    Participant

    Hello Zac,

    There is no setting or option for this.
    Obviously, there’s nothing stopping you connecting two mono sources but they’d share all processing & gain structure and you’d have no control over the panning. Might work for some scenarios but I suspect it’s not what you want.

    Thanks,
    Jake

    #70824
    Profile photo of SteffenR
    SteffenR
    Participant
    #70826
    Profile photo of jakethepeg
    jakethepeg
    Participant

    So does that allow separate processing of each?

    #70827
    Profile photo of zac
    zac
    Participant

    Thanks! I missed it when i RTFM! 😉

    #70835
    Profile photo of DavidCo
    DavidCo
    Participant

    Technically speaking, all sockets are mono. The ST local inputs are 1L, 1R, 2L etc..

    When routing input sockets to a stereo channel, the left must have an odd index, the right even. This is enforced throughout the GUI. You can route channels out to sockets however you wish.

    DC

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.