SQ5 to DM48

Forums › Forums › SQ Forums › SQ general discussions › SQ5 to DM48

This topic contains 6 replies, has 5 voices, and was last updated by Profile photo of leimum leimum 3 months, 1 week ago.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • 2018/03/17 at 3:50 pm #69693
    Profile photo of dbaudio
    dbaudio
    Participant

    Is it possible to connect the S-link on my SQ5 to the GigaAce Card installed in my DM48 (or CDM48) and have full pre-amp control and processing on the SQ5?

    2018/03/17 at 6:46 pm #69697
    Profile photo of Art
    Art
    Participant

    Not at this time. The only DX box that currently works with the SQs is the DX168.

    2018/03/17 at 11:09 pm #69699
    Profile photo of ddff_lv
    ddff_lv
    Participant

    You can get audio that way, but preamps have to be controlled separately.

    2018/03/18 at 11:47 am #69704
    Profile photo of Art
    Art
    Participant

    Sorry. I misread this. I was thinking DX48 (which doesn’t exist). My answer was totally wrong. ddff_lv gave you the correct answer.

    2024/01/13 at 5:21 pm #118385
    Profile photo of leimum
    leimum
    Participant

    Hello! Since this topic is few years old I’d be interested to know, if anything has happened regarding this setup. Is it possible to use SQ5 with CDM48 (with GigaACE card) as a stagebox and have preamp control on the SQ5?

    2024/01/13 at 6:43 pm #118388
    Profile photo of SteffenR
    SteffenR
    Participant

    NO. CDM48 is a mixing desk by its own, with much more processing power than a single SQ has.
    So why should anybody consider using the much better desk with the entry level desk as the master?

    2024/01/13 at 8:05 pm #118390
    Profile photo of leimum
    leimum
    Participant

    Ok, thank you!

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.