SQ5 – Midi: Levels Value

Forums › Forums › SQ Forums › SQ general discussions › SQ5 – Midi: Levels Value

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of KeithJ A&H KeithJ A&H 4 years, 10 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2019/06/20 at 11:54 am #84728
    Profile photo of xDGeForcexD
    xDGeForcexD
    Participant

    Hello,

    im very happy that the SQ now have a Midi Control.

    I have now the problem that i not know how the Value Coarse and Value Fine of the Levels is composing.

    Have anyone found the logic behind? Or what is the formula to convert the db in vc/vf and converse.

    The Example Level Values on the SQ-MIDI-Protocol-Issue1 does not help me.

    I don’t use any midi programs. It will be a self-programed program.

    best regards
    xDGeForcexD

    2019/06/20 at 2:10 pm #84733
    Profile photo of KeithJ A&H
    KeithJ A&H
    Moderator

    Hi @xdgeforcexd,

    Great that you’re making use of the new SQ MIDI control!
    Unfortunately, due to offsets and scaling it’s not a simple conversion (hence giving examples from -inf to +10dB in the protocol doc).
    You could obviously take a look at the MIDI output to find values, but if you contact us using support.allen-heath.com and let us know exactly what you are trying to achieve here, we should be able to help you out.

    Cheers,
    Keith.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.