SQ5 – DT168 – ME-1

Forums Forums ME Forums ME general discussions SQ5 – DT168 – ME-1

Tagged: 

This topic contains 5 replies, has 2 voices, and was last updated by Profile photo of SteffenR SteffenR 9 months, 3 weeks ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #93496
    Profile photo of Simon
    Simon
    Participant

    Hi guys,

    this is my first post so please go easy!

    I’m trying to setup a new system at my church and we have an SQ5 with a Dante card installed and a DT168. We also have a switch at the sound booth and one on stage.

    We’re considering purchasing the ME-1 system…can we plug directly into the DT168 and daisy chain the other ME-1s or do we need to purchase the ME-U?

    Thanks!

    #93498
    Profile photo of SteffenR
    SteffenR
    Participant

    No

    #93499
    Profile photo of Simon
    Simon
    Participant

    “No” we can’t connect it to the the DT168 or “no” we don’t need the ME-U?

    #93510
    Profile photo of SteffenR
    SteffenR
    Participant

    u can’t connect it to the DT168 since it is a DANTE device
    you can connect it to the SLink

    #93511
    Profile photo of Simon
    Simon
    Participant

    Great thanks 👍 Can I plug directly into the SLink or will I need a switch in between the SQ5 and ME-1?

    #93512
    Profile photo of SteffenR
    SteffenR
    Participant

    direct plugging is possible, if you need a switch make shure it is a 100MBit
    POE is helpful as well,
    so you only need one cable to every ME-1
    but daisy chaining is not possible without the PSU

    ME-U is a switch with POE and a audio network port
    if no audio format conversation is needed you don’t need the ME-U

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.