SQ5 & Dante Latency

Forums Forums SQ Forums SQ general discussions SQ5 & Dante Latency

Tagged: 

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #96783
    Profile photo of MichaelMichael
    Participant

    Hi all,
    I’m currently running an SQ5 and a Dante card into my older PC running Reaper and Waves Live Tune. For each mic channel, I’m routing the unprocessed channel to the IEMs and the tuned back in as a separate channel that goes to a stream mix and the house. This is if the PC crashes I still have something to turn back to. My current latency round trip is about 22ms. It’s noticeable by me but is lost in the house. I’m processing 2 to 3 channels at most.

    I had to set the Dante Virtual Sound Card settings at 10 ms and Reaper block size set to 128. I had to move to these settings to avoid the popping. My PC is roughly 8 years old with a dual core i7 at 2.9 ghz, SSD, and 16 gb of ram. Is there anything I can to improve the latency or am I stuck with this performance?

    #96796
    Profile photo of SteffenRSteffenR
    Participant

    by a Dante card for the PC

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.