SQ5: 2 mixes to same xlr output?

Forums › Forums › SQ Forums › SQ general discussions › SQ5: 2 mixes to same xlr output?

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2024/06/11 at 4:16 pm #122867
    Profile photo of BillHBillH
    Participant

    Hi,
    I’m trying to control feedback for two fixed mics (Lectern and Pulpit) in our Sanctuary, there are several other mic inputs as well. I know it is possible to put these mics on their own mix so that I can GEQ their mix differently, but … can I then send this mix to the same xlr output as the mix with the other inputs such that they all go to the same power amp?
    Thanks!
    BH

    2024/06/11 at 5:29 pm #122874
    Profile photo of SQuserSQuser
    Participant

    Yes, of course that is possible.
    Send these channels via a group to L/R and use the group’s GEQ.
    Don’t forget to turn off the assignments of these channels to L/R.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.