SQ Waves Card Multi track and Waves

Forums › Forums › SQ Forums › SQ general discussions › SQ Waves Card Multi track and Waves

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Jiminthebox Jiminthebox 5 years ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2019/03/29 at 11:16 pm #83049
    Profile photo of bcoolin
    bcoolin
    Participant

    The SQ WAVES CARD, when plugged into the I/O port of a SQ mixer, can I do multi-track recording and run WAVES plug-in simultaneously? Help much appreciated!

    2019/03/31 at 3:07 am #83072
    Profile photo of Jiminthebox
    Jiminthebox
    Participant

    I think you can use the same Soundgrid channel as an insert and a direct out, but I haven’t tried it. On the Dlive since the card is 128 channels I use 64 channels for plugins and 64 for recording, and so far I haven’t needed to do more than 64 channels (This week I came close though). Either way you would still be able to record over the USB connection and not need to touch Soundgrid up to 32 channels.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.