SQ – Subgroups

Forums Forums SQ Forums SQ general discussions SQ – Subgroups

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Søren Steinmetz Søren Steinmetz 5 years, 2 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #81306
    Profile photo of Travis
    Travis
    Participant

    How do I create a subgroup (NOT DCA) that will act as a bus that I can route to the main L/R send? For example, I am wanting to have a drum buss that is EQ’d and compressed that I can blend with the original drums in the mix.

    I basically want to be able to assign certain channels into a buss that I can process with EQ and compression separately from the processing I do on individual channels.

    #81311
    Profile photo of Søren Steinmetz
    Søren Steinmetz
    Participant

    When on the main fader, use the assign button and de-select the channels you want to route via the group.

    As default “aux” 9-12 are set up as four stereo groups, choose one of these and assign the channels to that group.

    Default you have the group masters on layer D

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.