SQ LR summed mono out

Forums › Forums › SQ Forums › SQ general discussions › SQ LR summed mono out

Tagged: ,

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • 2019/05/10 at 10:18 am #83763
    Profile photo of JosephJoseph
    Participant

    Hello Everyone,

    Can I assign LR sum to any mono out in SQ mixers for other delays or any other room outs? Currently we have only Stereo matrix.. I don’t want stereo out.

    Thank You in advance.
    Joseph

    2019/05/10 at 12:08 pm #83766
    Profile photo of ScottScott
    Participant

    You could use a mono group for this. Assign all of the input channels and FX returns to both the LR + the mono group, and then use the group out for your summed mono out.

    2019/05/10 at 2:23 pm #83767
    Profile photo of JosephJoseph
    Participant

    Thank You Scott for good suggestion.
    Is to good to use Y cable to sum stereo matrix out?
    Suggestions please…

    Thanks in advance.
    Joseph

    2019/05/11 at 4:30 pm #83783
    Profile photo of MarkPAmanMarkPAman
    Participant

    No, or at least, not with just a simple cable.

    https://www.rane.com/note109.html

    2019/05/11 at 10:04 pm #83785
    Profile photo of Anonymous
    Inactive

    Good link Mark!
    Why Not Wye?
    Notice it was originaly written in 1991

    2019/05/12 at 6:18 am #83786
    Profile photo of JosephJoseph
    Participant

    Thank you Mark for sharing very good article.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.