Topic: Sq Login issues | Allen & Heath Digital Community

Sq Login issues

Tagged: login, SQ, Sq Login issues, touch screen issues

This topic has 3 replies, 3 voices, and was last updated 1 year, 6 months ago by Martin.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
2023/06/05 at 4:56 pm #113196

Martin
Participant

Hello Community,
wàWhen I power up my Sq, the touch screen does not work, so I can not Login. I must switch off the console et switch it on again. Then it works. But it stress me out, that maybe one day I can not Login and not able to use the console. Have you heard about that ? Thank you very much.

2023/06/06 at 8:02 am #113212

Tobi
Participant

That ist a Problem with older Firmware. Update and all will be good.

Best Regards,
Tobias

2023/06/06 at 11:45 am #113215

h2k
Participant

I also had that issue just two days ago running firmware v1.4.4 on SQ5. The only thing that I did differently versus every other time I powered up was I had a formatted USB stick inserted.
It’s strange that you and I both just had this occur. I’ve had the SQ for about 5 months and have run 20+ shows with it….as well numerous boots/reboots learning the features.
Looking at the v1.5.9 release notes, this bug is specifically addressed.

2023/06/07 at 3:07 pm #113237

Martin
Participant

Thank you very much guys !
Indeed, I updated to 1.5.9
So far so good.
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.