SQ-Drive Multitrack patching

Forums Forums SQ Forums SQ troubleshooting SQ-Drive Multitrack patching

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of Sono Sono 2 months, 1 week ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #81834
    Profile photo of Sono
    Sono
    Participant

    To record stereo on my pendrive I go to I/O, Output Patch, Outputs, Mix Out. Then I select the USB tab and click on Main L and R assigning these to USB 1 and 2. When I go back to Utility/Stereo I can see that the peakmeters are assigned to Main L&R.

    I assume it’s the same process for 16 tracks recording so I go to I/O, Output Patch, Outputs, IP Direct Outputs.
    Then I select the USB tab and click on the channels I want to record assigning them to USBs 1-16.

    The thing is when I go back to Utility/Stereo I cannot see that the peakmeters are assigned to 16 channels.
    They’re all empty except the first two that are assigned to USB 1 and 2.

    Can someone tell me how to do this please?

    Thanks in advance

    #81847
    Profile photo of Søren Steinmetz
    Søren Steinmetz
    Participant

    Mine did that too, but as soon as I pressed record all tracks filled up with the patched channels.

    #81850
    Profile photo of Sono
    Sono
    Participant

    OMG you’re right!!!!!!
    Thanks a lot!!!! I LOVE YOU!!!!
    😉

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.