SQ Digital Split

Forums Forums SQ Forums SQ general discussions SQ Digital Split

Tagged: 

This topic contains 3 replies, has 3 voices, and was last updated by Profile photo of Joseph Joseph 1 week, 3 days ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #79883
    Profile photo of Joseph
    Joseph
    Participant

    In a single SQ Mixer can I split the mic/any input to two channel strips and have separate gain and EQ structure for FOH and Monitors?

    #79884
    Profile photo of Mfk0815
    Mfk0815
    Participant

    You can use the same input on more than one channel but they all share the same gain. but every channel also have an individual digital trim which can be used to adjust the internal channel gain. The rest opf the hannel processing (Preamp, Gate EQ, Compressor and routing) is then individual for each channel which uses that single input.

    #79885
    Profile photo of icecool
    icecool
    Participant

    you have 48 channel and you can assign one or more ip to one source.
    but gain share.
    Eq dyn and assign where you want.

    #79911
    Profile photo of Joseph
    Joseph
    Participant

    Thank You for the information. it clears my query. Can anyone has documentation or video on this? It will help us to implement.

    Thanks in Advance.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.