SQ Dante Card

Forums › Forums › SQ Forums › SQ general discussions › SQ Dante Card

This topic contains 3 replies, has 4 voices, and was last updated by Profile photo of moebius moebius 5 years, 4 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 2018/08/13 at 2:46 pm #73329
    Profile photo of Andrien
    Andrien
    Participant

    Support 32×32 @96khz and 64×64 @48khz to DVS
    Not sure if it will support 64×64 @96khz on Focusrite PciE Dante Card

    2018/09/19 at 4:41 am #78592
    Profile photo of Bo James
    Bo James
    Participant

    Do I need the SQ Dante card to record directly to a computer with Dante Virtual Sound Card? Or can I use the network ethernet plugged to the computer?

    2018/09/19 at 6:16 am #78594
    Profile photo of Mfk0815
    Mfk0815
    Participant

    yes you need the SQ Dante card. The build in network card is just for remote control and MIDI over TCP/IP.

    2018/11/28 at 4:51 pm #80409
    Profile photo of moebius
    moebius
    Participant

    It seems the limiting factor would be the DVS.

    From the user guide:

    100 Mbit
    32×32 at 48/24
    16×16 at 96/24
    8×8 at 192/24

    1 GBit
    64×64 at 48/24
    32×32 at 96/24
    8×8 at 192/24

    https://dev.audinate.com/GA/dvs/userguide/pdf/latest/AUD-MAN-DanteVirtualSoundcard_4.0.x-v1.1.pdf page 20

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.