Topic: SQ and IP8 | Allen & Heath Digital Community

SQ and IP8

Tagged: SQ IP8

This topic contains 7 replies, has 7 voices, and was last updated by Michael 4 years, 10 months ago.

Viewing 8 posts - 1 through 8 (of 8 total)

Author

Posts
2017/11/13 at 8:50 pm #66270

Art
Participant

Will the IP8 work with the SQ mixers?

I thought I had seen that question earlier, but was unable to find it now.

2017/11/14 at 7:57 am #66277

KeithJ A&H
Moderator

Hey Art,

IP6 and IP8 use with SQ is not currently supported, but has been requested quite a bit, so it is being looked into!

Thanks,
Keith.

2017/11/14 at 1:53 pm #66278

Art
Participant

Thanks! That would be a good thing!

2017/11/25 at 2:00 pm #66513

Wolfgang
Participant

+1

2017/12/04 at 1:26 am #66671

Andrien
Participant

+1, it will be good in places of remote mixing, especially for monitors since SQ has 12 stereo out.

2017/12/04 at 4:36 am #66677

Anonymous

from a person that likes instant access to surface this could be ideal.

2019/05/30 at 5:27 am #84118

Tatsuya Nakamura
Participant

I want to use SQ and IP8 in combination.

I am a playback engineer.

Send MIDI from the IP8 button.
I want to use MIDI as a trigger to AbletonLive on a Mac connected to SQ through a console.

During rehearsal, you can control the faders from S8 to SQ from a distance. In addition, you can play sound source with multitrack from USB via Mac via SQ USB.

I want you to make it happen.

2019/05/30 at 4:20 pm #84150

Michael
Participant

+1 I’d buy IP6 and IP8 if I could use them with my SQ
Author

Posts

Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.