SQ 5, 32 physical inputs use all 32 simultaneously.

Forums Forums SQ Forums SQ general discussions SQ 5, 32 physical inputs use all 32 simultaneously.

Tagged: 

This topic contains 5 replies, has 4 voices, and was last updated by Profile photo of BC BC 1 week, 5 days ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #122747
    Profile photo of Area51drones
    Area51drones
    Participant

    I have the SQ-5, the DX-168 stage box, Dante card and waves card for the SQ-5. I don’t know how to use all 32 jacks at the same time. 16 on the stage box and 16 on the mixer. How do I route this? If I had the Dante version of the stage box, how might this help? Thank you! Jim Las Vegas.

    #122748
    Profile photo of SteffenR
    SteffenR
    Participant

    Sorry, but isn’t reading the manual not the first thing to do?

    #122749
    Profile photo of Tobi
    Tobi
    Participant

    Best Regards.

    #122751
    Profile photo of Area51drones
    Area51drones
    Participant

    Yes. Especially with something as complex as sound engineering. There are many good instructors that have good YouTube channels to help the learning process along. Again..Yes to should read the manual first. When it’s hard to understand, I do include going elsewhere for instruction. Thanks for your input. Jim

    #122752
    Profile photo of Area51drones
    Area51drones
    Participant

    Thank you for the input link. It always surprises me as I read and watch a lot of instructional videos… How much I miss from the first time viewing. When I take a second look at videos on YouTube for any subject, you pick up something new every time. Learning is great.

    #122843
    Profile photo of BC
    BC
    Participant

    DX Link
    Can you connect ins & outs simultaneously?

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.