Split Inputs for FOH and Monitors in single Avantis mixer

Forums Forums Avantis Forums Avantis General Discussions Split Inputs for FOH and Monitors in single Avantis mixer

This topic contains 5 replies, has 3 voices, and was last updated by Profile photo of Joseph Joseph 9 months, 3 weeks ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #88214
    Profile photo of Joseph
    Joseph
    Participant

    Can I split every inputs into two separate channels? so that I can have separate eq and dynamics for FOH and Monitor mixes?

    Example, First two layers for FOH with separate eq & dynamics and next two layers for Monitors with separate eq & dynamics.
    Is this possible?

    #88215
    Profile photo of SteffenR
    SteffenR
    Participant

    you can patch every input to every channel strip and you can patch one input to every channel strip and evrething in between

    and you can configure every layer as you like
    inputs, outputs, DCA where ever you want it

    #88234
    Profile photo of Joseph
    Joseph
    Participant

    Yes that can be done but my question here is can we split the every input? With different eq and dynamics? Working like tow Mixers for FOH and Monitors.

    #88249
    Profile photo of xyz
    xyz
    Participant

    I would like to know that as well !?

    #88264
    Profile photo of SteffenR
    SteffenR
    Participant

    what was not clear on my answer?
    you have 64 input channels
    and it is possible to use an input socket on two or more channels
    so if you have 32 inputs you can use every input on at least two channels
    one dedicated to FOH and one to MON or broadcast or whatever you name it
    you only have to patch it

    but the multi-surface mode from dLive is not possible at this time

    #88271
    Profile photo of Joseph
    Joseph
    Participant

    Thank You Steffen.
    Hope there is feature like tielines like in SQ.

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.