Specification for SQ5 Crosstalk

Forums › Forums › SQ Forums › SQ general discussions › Specification for SQ5 Crosstalk

Tagged: 

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Kris Kurowski Kris Kurowski 4 years, 2 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2020/01/29 at 9:57 am #89143
    Profile photo of yonggerry
    yonggerry
    Participant

    There is no information about Crosstalk spec(performance numerical value) in the SQ5 data sheet.

    I want to know performance differences between SQ5 and YAMAHA TF1.

    The YAMAHA mixer has an information on it as below

    Crosstalk : –100 dB (Measured with a –30 dB/octave filter@22 kHz), adjacent INPUT/OMNI OUT channels, Input Gain=Min.

    What is the difference in crosstalk performance compared to this?
    Could you let me know the informations about SQ5 crosstalk spec?

    2020/01/29 at 9:49 pm #89158
    Profile photo of Kris Kurowski
    Kris Kurowski
    Participant

    Why a crosstalk should be of concern? Regardless of any actual measured values it’s FAR from anything that would be remotely noticeable. I did quick test with inputs and outputs driven to maximum levels and there is no signal on anything neighbouring. BTW SQ is far superior than Yamaha TF series regarding processing, preamp, component quality.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.