For monitor sends I would suggest another source point:
“Post Compressor”
An example:
Usually I work with monitor ways without compression, so that the musicians can assess their dynamics themselves and so that I have more gain before feedback. In some cases I want to send the signals with compression, e.g. to a drummer, so that the bassist’s touch sounds become more bearable on his monitor 😉
In the dLive there is then only the possibility to send the signal incl. delay. At this point I do not want to have any delays, so that the finetiming of the musicians is not disturbed.
This was solved a bit more generously in iLive, here was the point “Post Comp”.
Of course, the best thing would be to have these options per channel and per aux 😉 but then of course it gets much more complicated.
.
