some questions

Forums Forums SQ Forums SQ general discussions some questions

This topic contains 4 replies, has 4 voices, and was last updated by Profile photo of Nicola A&H Nicola A&H 3 years, 5 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #65870
    Profile photo of litti
    litti
    Participant

    hi and congrats to A-H for the newborn baby 🙂

    1) are the LF and HF bands only peak or shelving (as in the Qu series) or also LPF/HPF as on the GLD?

    2) does the desk have selectable HPF on the aux and mtx outs?

    3) are the 16T and 16vu emulations included among the compressor type options?

    4) will DEEP processing be available for free or at additional cost?

    thanks!

    #65887
    Profile photo of Sternenlicht
    Sternenlicht
    Participant

    Yes, what means DEEP processing ? Does it involve buying plugins ?

    5. Is there any chance, that we can get a midi clockable looper, with configurable length and ADSR? ? That would make the console perfect for live electronic shows, where you record your performance to a loop – rearrange your patterns, and move back to your live performance.

    #65889
    Profile photo of Nicola A&H
    Nicola A&H
    Keymaster

    Hi All,

    1) LF and HF in the PEQ are parametric or shelving, not LPF/HPF.
    2) No HPF on mix outputs.
    3) The 16T and 16VU are not included. In V1.0, the Allen & Heath RMS and Peak compressors are included. Further compressors will be available later as DEEP models.
    4) The SQ is capable of running DEEP processing models. By registering your product and downloading V1.1 firmware, you will get a free DEEP preamp model worth $149. Further models will be offered in future as chargeable add-ons, and allow to customise your SQ whilst benefitting from DEEP processing technology e.g. no extra latency.
    5) There is no plan to add MIDI timecode or a looper, but I can put it on the list of requests for consideration!

    #65898
    Profile photo of topdj
    topdj
    Participant

    did this only put 2 led level meters on each channel? the Qu has 3 I was hoping for more not less

    #65916
    Profile photo of Nicola A&H
    Nicola A&H
    Keymaster

    Hi topdj,
    Watch out for more videos on our patented Chromatic channel meter. The single LED uses variable brightness and colours to give the same amount of information as a multi-segment meter, but in a very compact space.

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.