Soft Rotarys?

Forums Forums SQ Forums SQ feature suggestions Soft Rotarys?

This topic contains 15 replies, has 11 voices, and was last updated by Profile photo of Valentyn L Valentyn L 5 months, 1 week ago.

Viewing 15 posts - 1 through 15 (of 16 total)
  • Author
    Posts
  • #69231
    Profile photo of Phill
    Phill
    Participant

    looking to see if I can assign FX decay time to a soft rotary…. or FX delay time as well…

    #69245
    Profile photo of Phill
    Phill
    Participant

    also… talkback level and on/off to soft rotary 4 for example

    #69253
    Profile photo of Steffen R
    Steffen R
    Participant

    is this a show stopper? Don’t think so…

    #69268
    Profile photo of Phill
    Phill
    Participant

    nope but would be good for folk like me 🙂

    #69275
    Profile photo of Steffen R
    Steffen R
    Participant

    But why is this post in the troubleshooting forum?

    #70924
    Profile photo of Westpower
    Westpower
    Participant

    I would second that it would be very useful to be able to control talkback channel preamp gain with the soft rotaries – this is possible for all of the other local inputs so appears to be a simple update to add this ability.

    #71034
    Profile photo of Baylink
    Baylink
    Participant

    It’s not.

    It’s in the RFE forum, where it belongs. 🙂

    #71625
    Profile photo of Seven79
    Seven79
    Participant

    One more for “Changing Decay” or “Changing Delay Ratio”.
    And I wanna see the values while turning the knob.

    #71650
    Profile photo of Milow
    Milow
    Participant

    +1 for both suggestions, it’s nearly usable at the moment.

    #72275
    Profile photo of Seven79
    Seven79
    Participant

    +1 for FX Parameters on Soft Knobs
    AND: We need to see the Values while turning the knob 🙂

    #79179
    Profile photo of Coronos
    Coronos
    Participant

    +1 for FX delay and decay times on SoftRotaries

    #79180
    Profile photo of Mfk0815
    Mfk0815
    Participant

    With V1.3 you can use the Softrotaries to control a time parameter and on some fx types also a second parameter. The value is displayed while you change it or when you use the view button. See new manual on page 57 which parameters for the different fx types can be assigned to the soft rotaries.
    Now the soft rotaries become more and mor useful. A custom label and color would make it even more useful.

    #79181
    Profile photo of Bracumba
    Bracumba
    Participant

    Where can this new manual be found ?

    #79191
    Profile photo of KeithJ A&H
    KeithJ A&H
    Moderator
    #79193
    Profile photo of Bracumba
    Bracumba
    Participant

    Thank you

Viewing 15 posts - 1 through 15 (of 16 total)

You must be logged in to reply to this topic.