Signal Generator in PAFL buses

Forums › Forums › dLive Forums › dLive General Discussions › Signal Generator in PAFL buses

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2022/04/07 at 10:12 pm #106735
    Profile photo of REA EngineeringREA Engineering
    Participant

    Hello all,
    Perhaps this is normal or not.

    When I enable the Signal Generator, with not outputs assigned, it feeds to the Left side of both of my PAFL mixes. Is this normal.
    I don’t see it patched to any channels, anywhere.

    Thanks for any info on this.

    Regards
    Roger

    DM0 / C3500 / DT168

    2022/04/08 at 11:27 am #106748
    Profile photo of SteffenRSteffenR
    Participant

    Maybe the signal generator is patched to an input socket?
    You can’t see that in the screen of the signal generator.

    2022/04/08 at 9:44 pm #106754
    Profile photo of REA EngineeringREA Engineering
    Participant

    Thanks Steffen,
    Yeah, I looked at that. If it were patched to an input, should it not be seen in the input meters?

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.