Signal coming in, not being passed through

Forums › Forums › GLD Forums › GLD troubleshooting › Signal coming in, not being passed through

  • This topic has 2 replies, 2 voices, and was last updated 4 years ago by Profile photo of ZakZak.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2020/11/26 at 7:44 pm #96623
    Profile photo of ZakZak
    Participant

    Hey guys, hope you are well.

    Today when we plugged our RCA cables from the pc into 47/48 ST we noticed that the sound isn’t coming through any of the auxes or the main mix. Signal is shown on the channel but when I turn up the fader to mix it in no audio comes through the monitors or the speakers. Could this be because of incorrect configuration? Pls let me know.

    2020/11/26 at 7:47 pm #96624
    Profile photo of JonathanJonathan
    Participant

    Most likely. Check the routing tab.

    2020/11/27 at 7:25 am #96644
    Profile photo of ZakZak
    Participant

    can you explain how I route it to the main and auxes?

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.