SHELF .. PEQ ??

Forums › Forums › Qu Forums › Qu troubleshooting › SHELF .. PEQ ??

This topic contains 3 replies, has 3 voices, and was last updated by Profile photo of GCumbee GCumbee 10 years ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 2014/04/12 at 4:28 pm #38992
    Profile photo of Andy
    Andy
    Participant

    After having updated to 1.4 I notized, that I can’t set the Q to SHELF. When I turn the knob to max left, the screen shows Q=1,5. I can set it to SHELF via iPad, but when I’ve done this, the Q knob of the desk doesen’t work anymore, until I change the Q (again with the iPad) to a setting lower than 1.5. After this, the Q knob works as described above (No SHELF).

    Can anyone try and maybe confirm this?

    Andy

    2014/04/12 at 8:16 pm #38995
    Profile photo of mervaka
    mervaka
    Participant

    It’s been locked off from the strip, you need to access that using the screen encoder. I guess it’s to stop one accidentally switching between shelf and bell.

    2014/04/12 at 11:04 pm #38997
    Profile photo of Andy
    Andy
    Participant

    Thank you. Now I understand. I didn’t try the screen encoder .. and .. who reads manuals 😉

    Andy

    2014/04/13 at 2:07 am #38998
    Profile photo of GCumbee
    GCumbee
    Participant

    I have found reading release notes on firmware upgrades is VERY important.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.