Setting up an Aux send on GLD112

Forums › Forums › GLD Forums › GLD general discussions › Setting up an Aux send on GLD112

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2015/04/14 at 9:46 am #46907
    Profile photo of Anonymous
    Inactive

    I am trying to create an Aux send for our induction loop system. Any advice would be helpful!

    2015/04/14 at 10:56 am #46910
    Profile photo of tenderboytenderboy
    Participant

    RTFM

    look for the (most likely predefined auxes) on the right Hand side of the mixer)
    press the “mix” key of the aux
    now all the channelfaders send Signal to this aux when pushed up

    (define the Output of the aux in the I/O menu)

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.