Separate Effects on a monitor mix

Forums › Forums › SQ Forums › SQ general discussions › Separate Effects on a monitor mix

This topic contains 4 replies, has 3 voices, and was last updated by Profile photo of Mike C Mike C 1 year, 1 month ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • 2023/03/26 at 12:39 am #112141
    Profile photo of Matt
    Matt
    Participant

    Our church has an SQ7 and we currently use a monitor mix for our livestream. We want to apply a separate reverb on that mix that doesn’t go out to the main L/R. Is this possible and if it is, how is it. Thanks!

    2023/03/26 at 3:17 am #112143
    Profile photo of Mike C
    Mike C
    Participant

    On that reverb return set that monitor mix send to pre fade and keep the main LR level turned down or just un assign the that reverb return from the main LR mix.

    2023/03/26 at 3:33 pm #112153
    Profile photo of nottooloud
    nottooloud
    Participant

    I prefer to add a pair of omni room mics to my stream mixes. The actual room and any ambient noise therein adds a lot of life to a stream.

    2023/04/07 at 3:31 am #112325
    Profile photo of Matt
    Matt
    Participant

    Thank you so much. Pretty easy and worked great.

    2023/04/08 at 9:22 pm #112354
    Profile photo of Mike C
    Mike C
    Participant

    If you add room ambient mics be sure to un-assign those channels from the main LR mix.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.