Sending effect to monitor if fader is down in Mains?

Forums Forums Qu Forums Qu general discussions Sending effect to monitor if fader is down in Mains?

This topic contains 3 replies, has 3 voices, and was last updated by Profile photo of Mbirame Mbirame 5 years, 7 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #51325
    Profile photo of Mbirame
    Mbirame
    Participant

    Hi folks,
    We have a show coming up where we are having to use our QU-16 as a monitor mixer and sending several feeds to the FOH. The LR main output is only sending drums. Mix 4 is sending only lead vox. Lead vox needs to have reverb. I don’t see a way to have reverb on the lead vox unless it is also going through the Main LR. Is there a way to do that? Thank you!

    #51326
    Profile photo of cornelius78
    cornelius78
    Participant

    There are several options.

    You can use the fx as an insert.

    Or you can set the fx as pre-fader, mixing the vox channel and fx return to mix4.

    Or you can un-assign the vox channel from LR, so the fact that the fader is raised won’t mean anything.

    Or you can send your drums out a different mix.

    #51327
    Profile photo of [XAP]Bob
    [XAP]Bob
    Participant

    How are you putting the reverb on – if you use mix->return then you can assign the return to as few mixes as you like ….

    #51345
    Profile photo of Mbirame
    Mbirame
    Participant

    Thanks guys. Unassigning the VOX to the LR worked great. Thanks again!

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.