Send output over network

Forums › Forums › SQ Forums › SQ general discussions › Send output over network

Tagged: ,

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of ddff_lv ddff_lv 5 years, 1 month ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2019/03/07 at 5:00 am #82445
    Profile photo of CrossBound
    CrossBound
    Participant

    Is it possible to use the network output on the SQ-5 to record to a PC? I know you can record from USB-B, but I can’t seem to find anything stating yea/nay about recording over TCP/IP.

    We do plan to be using iPads to control the unit, not sure if that is relevant or not.

    2019/03/07 at 8:40 am #82449
    Profile photo of MarkPAman
    MarkPAman
    Participant

    No. The network port does not send or receive audio. It is for control data only, which means you’ll need it for iPad control anyway.

    You could fit a Dante card and record from that if you need more than the USB-B port offers.

    2019/03/10 at 2:00 pm #82529
    Profile photo of ddff_lv
    ddff_lv
    Participant

    If by network port you mean the one in Dante or Waves card, then yes you can record from it. Not from built-in network port that is used for control data only.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.