Selected Channel ABCD

Forums › Forums › dLive Forums › dLive feature suggestions › Selected Channel ABCD

Tagged: 

This topic contains 1 reply, has 1 voice, and was last updated by Profile photo of jonaslydfolket jonaslydfolket 5 years ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2019/03/23 at 11:38 am #82914
    Profile photo of jonaslydfolket
    jonaslydfolket
    Participant

    There’s a, imo, very obvious feature missing from the new ABCD function, which is ABCD selected channel. I want to be able to select a channel, hit a UDK and that channel gets set to input B, for instance.
    Very useful for spare packs in a theatre setup. It’s too tedious to select the channel, go into preamp and tap B if you have to keep mixing, communicate with backstage and keep reading a script at the same time.

    2019/03/23 at 12:53 pm #82915
    Profile photo of jonaslydfolket
    jonaslydfolket
    Participant

    Actually, other UDK functions could do with a “selected channel” option.
    Think AMM in/out, assign on/off.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.