Scene recall bug

Forums › Forums › dLive Forums › dLive troubleshooting › Scene recall bug

Tagged: 

This topic contains 0 replies, has 1 voice, and was last updated by Profile photo of SZJ SZJ 11 months, 2 weeks ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • 2023/05/14 at 10:36 am #112880
    Profile photo of SZJ
    SZJ
    Participant

    I have a dual console, one mixrack setup. I’ve had a bug a few times now, where I have recalled a scene on the second surface via a computer running director.
    I recall a scene with only a few things, the rest is filtered out. One of the things it recalls is routing to a mono aux from a few channel. Sometimes the channels doesn’t go to where they should, but all the way up to +10 (sometimes more, see picture). It is not showing on the faders, only in the routing window of the Aux. Everything is running v1.96, C3500 and CDM64.

    Attachments:
    You must be logged in to view attached files.
  • Author
    Posts
Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.