One problem that should be simple to fix.
– Save the FBA assistant settings on power restart and also save them in the scenes.
When you power on the unit, the outputs all come up with “fixed” and “hold” selected in the FBA. Those settings don’t get saved in the scenes and the state isn’t even preserved between restarts of the unit.
I always want to start with “hold” NOT being selected and “live” selected. That way if there is any initial feedback when I start things up, at least there is the protection from the live setting being engaged.
And actually that’s the way I use it mostly. I rarely have any “fixed” feedback set because I rarely have any feedback under normal operation. It’s only when a handheld mic gets moved over to a monitor or the singer goes out in front of the main speakers. So I generally always have “live” selected and “hold” off so that I’m getting live feedback suppression. But none of those settings are preserved, it always comes up with “hold” and “fixed” set.
.
