S3000 issues with recalled shows

Forums Forums dLive Forums dLive troubleshooting S3000 issues with recalled shows

This topic contains 0 replies, has 1 voice, and was last updated by Profile photo of RayS RayS 1 week, 6 days ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #80466
    Profile photo of RayS
    RayS
    Participant

    had not noticed before updating to 1.71.. but, everytime i recall a show stored either on internal mnemory or usb key, the i/0 key “lcd display” (on the left end side of the surface name db io etc.) shows the wrong Rack or Surface output labels on stereo auxes/groups and matrixes….. (input info is correct)… however, under the i/o patch it’s accurate, it’s just the labelling that is wrong so the io lcd display is no help finding where things are patched to. You have to either go to the i/o page and look it up there or…power down the surface/reboot and then it shows the right assignments…I have this on both my dlives……never noticed this before as i rarely recall shows, but today i did! Tried saving brand new shows, recalling gives the same issue until a reboot!

    Thx

    Ray

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.