S3000 Groups

Forums › Forums › dLive Forums › dLive General Discussions › S3000 Groups

Tagged: 

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Nicola A&H Nicola A&H 4 years, 11 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2019/05/24 at 1:15 pm #83993
    Profile photo of Tom
    Tom
    Participant

    I have 1 mic coming into a input channel at reading 0Db on the input meters. I unassigned from the main mix and assign it to a group. The group level is barely reading on the meter. Is this normal? How do I get better gain structure on the group for proper processing and output levels. Thanks in advance.

    2019/05/24 at 4:53 pm #83997
    Profile photo of Nicola A&H
    Nicola A&H
    Keymaster

    Hi Tom,

    The Group meter is post-fade so check your Group fader is at 0dB, and that there is no processing on the Group affecting the level e.g. compressor, eq, inserts.

    Also, with dLive you can allow peaks well over 0dB on the inputs, in fact even the Peak LED lights up 5dB before any digital clip, so there is plenty of headroom available.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.